Customer Rating :
DC GEAR MOTORS :Wondermotor 12vdc Remote Control Wireless Electric Gear Motor Momentary Switching between Reverse and Forward Details
DC GEAR MOTORS :Wondermotor 12vdc Remote Control Wireless Electric Gear Motor Momentary Switching between Reverse and Forward Details
Product Description
This is a brand new electric gear motor that has an extremely high torque and is equipped with a wirelessmomentary controller.
The gear motor is measured to be 7 inch long and the motor itself has a diameter of 2.5 inches. Drive shaft
is 10mm in diameter with 2 flats where flat to flat is 6mm. The shaft has a threaded end that is to fit a M6
tightening nut. Rated voltage of this gear motor is 13.5 VDC and maximum speed is 50 RPM. Rated
output load is 60 watts and output toruqe at 50 RPM is 11.5 N-m (8.5 ft-lb). Mounting is based on M6
screw mounting.
The wireless controller functions as a reversible momentary control switch from a 12v dc power source.
By holding down the right side button, the motor runs in one direction until the user releases the button; by
holding down the left side button, the motor runs in the opposite direction until the user releases the button.
Current rating is 3 amps. Two transmitters (with batteries) are included in this package. Wireless signal
range is 100 ft.
This is a single speed system.
- 12V PMDC
- Wirless Remote Controlled
- Worm Gear Design
- Low Speed Gear Motor
- 50 RPM
